WhatsApp +212 772 096 856

TVPikoma – IPTV Subscription for International TV - 60+ Countries

Setting Up an IPTV Set-Top Box: MAG Portal and Formuler Guide

An IPTV box is the most dependable way to watch live channels, because it exists for that one job. Infomir MAG models log in through a portal address that TVPikoma links to the MAC address of the box. Formuler models such as the Z11 Pro Max use the MyTVOnline app and can also install Android apps. Send us the MAC on WhatsApp, we switch it on, and the household gets a remote with real channel buttons, which many older relatives prefer.

IPTV on MAG and Formuler box: what to have ready

  • A MAG box from the 3xx, 4xx or 5xx range, or a Formuler Z8, Z10 or Z11 model
  • The MAC address printed on the label underneath
  • The TVPikoma portal URL, sent once support has your MAC
  • A network cable running from the router to the box

Still without a TVPikoma login? Test the service free for 24 hours with the channels you grew up with, browse the channel list by country, see how our worldwide IPTV line-up is organised, or check IPTV subscription prices.

Setting up TVPikoma on MAG and Formuler box, one step at a time

  1. Locate the MAC address

    Look at the sticker on the underside of the box, or open the device information screen in the settings. Every MAG address begins 00:1A:79. Photograph the label and send the picture to TVPikoma on WhatsApp, so no digit gets copied wrongly on either side.

    Compare TVPikoma plans

  2. MAG: type in the portal

    Go to Settings, System settings, Servers, Portals. Enter TVPikoma in the Portal 1 name field, then type the portal address from WhatsApp precisely. Save the change and pick Reboot device. When the box starts again, it connects to the portal without further input.

  3. Formuler: set up MyTVOnline

    Launch MyTVOnline and select the option to add a portal. Give it a nickname and enter the portal address, or choose Xtream Codes and use your username and password. Because Formuler boxes also run Android apps, you can install TiViMate later if its grid guide appeals.

  4. Choose the time zone and menu language

    On a MAG box, open Settings, System settings, Advanced settings. Select your Time zone and, if wanted, a different Language for the menus, then save and restart. With the correct zone, guide entries show your local time even when channels come from several continents.

  5. Arrange channels by country

    After the restart, the full 25,000+ list loads together with the built-in programme guide. Open the group list and go straight to your home-country section. The coloured keys on the remote handle favourites and the guide, so daily channels open in two presses.

  6. Add a second portal for another relative

    MAG boxes keep more than one portal. Under Servers, the Portal 2 name and Portal 2 URL fields accept a second account, for instance for a grandparent who wants separate channels and favourites. Every portal needs its own activation, so speak to support before entering it.

  7. Use the network port for 4K

    MAG and Formuler boxes both include an Ethernet socket. Connect it for 4K channels, because a cable eliminates the wireless dropouts that show up as frozen frames whenever the action on screen moves fast.

  8. Keep the box software current

    On a MAG box, the Software update entry sits inside System settings. Run it every few months, since updates fix playback bugs and improve support for newer stream formats. Formuler boxes offer updates through their own settings menu. Never switch the box off while an update is installing.

  9. Formuler: set the clock and language in Android settings

    Formuler boxes run Android, so date, time zone and system language live in the main Android settings rather than in MyTVOnline. Open them from the home screen, confirm automatic time and the correct zone, and choose the language that suits the household. MyTVOnline then shows guide times in your local hour.

  10. Show relatives the essential buttons

    Older family members often want only three things: switching on, finding their channels and opening the guide. Put their favourite home-country channels in the favourites list, then walk them through the guide key and the back key once. A sticky note beside the remote with the channel numbers helps more than any manual.

MAG and Formuler box not working? Fixes for the usual problems

STB blocked appears, or the screen stays empty

Either activation has not finished yet or a character in the MAC was wrong. Take a photo of the label under the box, send it to support on WhatsApp, and the fix normally takes a few minutes.

The portal opens but channels are missing

Restart the box so it requests a new list, then check the portal address against the WhatsApp message letter by letter. If channels are still absent, ask support to refresh the account on their side.

The box warns that time is not synchronised

MAG boxes set their clock from an NTP server. Open Settings, System settings, Servers, General, enter pool.ntp.org as the NTP server, save and reboot. Guide listings fall back into place once the clock is right.

Some channels have correct guide times, others do not

Start by checking Time zone under Advanced settings. If local channels agree but one foreign group is off by an hour, that guide source may be slow to reflect a daylight saving change. Tell support which group is affected so it can be checked.

The box sits on the loading portal screen

Check that the network cable is firmly seated and that the router has internet. On a MAG box, open System settings, Network Info to confirm an IP address. Then reboot. If the portal still will not load, message support with a photo of the screen.

The remote stops responding

Replace the batteries first and point the remote straight at the front of the box, because many MAG remotes use infrared. Clear any object blocking the sensor. If only certain keys fail, the remote may be worn, and Infomir or Formuler sell replacements.

The picture looks stretched or cropped

On a MAG box, open Settings, System settings, Video and check the output resolution and aspect settings against your television. Match the resolution to the TV, for example 1080p or 4K. If only one channel looks odd, the broadcaster may send a different shape of picture.

Choosing an IPTV app for MAG and Formuler box

Bring home-country TV to your MAG and Formuler box

TVPikoma plans start at $15 a month: 25,000+ live channels from 60+ countries, 4K, FHD and HD streams, and catch-up. The login reaches you on WhatsApp in under 15 minutes.

IPTV on MAG and Formuler box: frequently asked questions

Formuler Z11 Pro Max or a MAG box: which suits TVPikoma better?

Either is a sound choice. The Formuler Z11 Pro Max runs Android, giving you MyTVOnline alongside apps like TiViMate, and it plays 4K HDR. A MAG box keeps things plain: a single portal, a responsive guide and a sturdy remote that feels like cable. Pick Formuler if you like options and MAG if you want simplicity.

Can STBEmu run a MAG portal on an Android device?

Yes. STBEmu is an Android app that behaves like a MAG set-top box, letting a portal address run on an Android TV box or a Fire OS stick. It presents a MAC value, which TVPikoma activates. Most viewers find an Xtream login in TiViMate or Smarters simpler, yet STBEmu is handy for anyone attached to the MAG look.

Is a dedicated IPTV box worth buying over a streaming stick?

A box pays off for daily viewers. It brings wired networking, a faster guide, a remote with number keys and no sideloading at all. A Fire TV Stick 4K Max is much cheaper and plays the same streams well. Occasional viewers can begin with a stick, whereas older family members often find a box more comfortable.

Can I move my TVPikoma account to a new box later?

Yes. Send support the MAC address of the replacement box on WhatsApp and the portal is transferred. Your plan dates stay unchanged. If the new device is a Formuler or another Android box, an Xtream login works too, and that route needs no MAC activation.

Which MAG models handle 4K channels?

Current 4K-capable MAG models include the MAG 524 and MAG 540, which decode HEVC and output 4K over HDMI. Older MAG 250 and 254 units stop at HD, which still suits most news and drama. Whatever the model, connect it with Ethernet for 4K and check that the television input is set to accept a 4K signal.

Can a MAG box play catch-up from TVPikoma?

Catch-up on a MAG box depends on the portal and on whether a channel keeps an archive. Where both support it, past programmes appear in the guide and can be played back. Ask support on WhatsApp which channel groups include an archive, since availability varies by country and broadcaster.

Is STBEmu Pro worth paying for?

STBEmu comes as a free version and a paid Pro version, which removes adverts and adds extra options. If you only want to see whether a portal suits you, the free version is enough to test. Once you settle on the MAG layout on an Android device, Pro makes daily use cleaner.